Table of Contents
Advertisement
2.3
Detaching the arm (for VESA wall
mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes. (Figure 1)
3.
Remove the base (Figure 2).
4.
Use a screwdriver to remove the screw on the hinge (Figure 3), then remove
the hinge.
VG245HE
VG245H/VG245Q
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
•
2-4
(Figure 1)
The VESA wall mount kit (100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
1
2
(Figure 2)
1
2
1
2
(Figure 3)
1
2
Chapter 2: Setup
Advertisement
Table of Contents
