Table of Contents
Advertisement
2. Setting up the Display
2. Toggle to the up or down to select
main menu [PIP / PBP], then toggle to
the right to confirm.
3. Toggle to the up or down to select
[PIP / PBP Mode], then toggle to the
right.
4. Toggle to the up or down to select
[Off], [PIP], [PBP 2Win], [PBP 3Win] or
[PBP 4Win], then toggle to the right.
5. Now you can move backward to set
the [Off], [PIP], [PBP 2Win], [PBP 3Win]
or [PBP 4Win].
6. Toggle to the right to confirm your
selection.
MultiView in OSD menu
• PIP / PBP Mode: There are five modes
for MultiView: [Off], [PIP], [PBP 2Win],
[PBP 3Win] and [PBP 4Win].
[PIP]: Picture in Picture
Open up a sub-window
side-by-side of other
signal source.
When the sub source is
not detected:
[PBP 2Win]: Picture by Picture
Open up a sub-window
side-by-side of other
signal sources.
When the sub source is
not detected.
B
A
(main)
B
A
(main)
A
B
(main)
A
(main)
11
[PBP 3Win]: Picture by Picture
Open up two sub-
windows of other
sources.
When the sub sources
are not detected.
[PBP 4Win]: Picture by Picture
Open up three sub-
windows of other signal
sources.
When the sub sources
are not detected.
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
• PIP Size: When PIP is activated, there
are three sub-window sizes to
choose: [Small], [Middle], [Large].
• PIP Position: When PIP is activated,
there are four sub-window
positions to choose.
Top-Right
B
A
(main)
C
A
(main)
A
B
(main)
C
D
A
(main)
B
Small
A
Middle
Large
(main)
Bottom-Right
Advertisement
Table of Contents
