How To Attach The Stand; How To Remove The Stand - Hitachi 40C301 Owner's Manual

How to attach the stand

NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1
Carefully place the TV screen face-down on a clean, cushioned surface.
2
Attach the stands to the bottom of the TV by inserting the guide posts into the slits at
the bottom of the TV as shown in Fig.1. Note: Each stand is marked R (right) and L
(left) to indicate the appropriate side of the stands.
3
Secure the stands to the TV by using the supplied 4 screws as shown in Fig. 2.
Stands
Fig. 1
• Be sure to follow the above instructions. Insufficient tightening or incorrect installation of
the stand will not support your TV correctly, and could result in damage or injury from tip-
over.

How to remove the stand

When you transport this product, remove the stand and pack it flat against the back of the
unit in the carton. To remove the stand, perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands. To disconnect the stand remove
the screws from the bottom of TV.
Note: Before wall-mounting, please carefully check the location of the TV's mounting holes.
8
Screws x 4
Fig. 2