Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/
Streaks or Lines
Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is
printed correctly.
Make sure joint button is not lifted up.
Check1
Push the print head locking cover to make sure the print heads are installed properly.
Next, push the joint buttons firmly to the end.
Check Installation of Print Head
Important
• Remove the orange label and the protective tape of the print head to install it.
Check paper and print quality settings.
Check2
Printout Results Are Unsatisfactory
Are the print head nozzles clogged?
Check3
Print the nozzle check pattern and make sure that the ink is coming out normally.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see
Is Faint or
Uneven.
Print the nozzle check pattern.
Step1
After printing the nozzle check pattern, examine the pattern.
• From the printer
Printing the Nozzle Check Pattern
• From the computer
◦ For Windows:
Printing a Nozzle Check Pattern
395
If Printing