Programming The Remote Control; Programming Code - LG M2380DB-PZ Owner's Manual

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or universal remote. It can be programmed to operate most remote-control-
lable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Cleaning the Screen
1
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on
the component such as a VCR and press the corresponding mode button (such as a DVD or VCR)
on the remote control, while pointing at the component. Test the POWER and P ꕌꕍ buttons to see
if the component responds properly. If not, the remote requires programming to operate the device.
2 Turn on the component to be programmed, then press the corresponding mode button (such as a
DVD or VCR) on the remote control. The remote control button of desired device is lighted.
3
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed
for the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers
for the corresponding component can be found on the following pages. Again, if the code is correct,
the device will turn off.
5
Press the MENU button to store the code.
6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2.

PROGRAMMING CODE

DVD
Brand
APEX DIGITAL
DENON
GE
HARMAN KARDON 027
JVC
LG
MAGNAVOX
MARANTZ
MITSUBISHI
146
Codes Brand
022 NAD
020 014 ONKYO
005 006 PANASONIC
PHILIPS
012 PIONEER
001 010 016 025 PROCEED
013 PROSCAN
024 RCA
002 SAMSUNG
Codes Brand
023 SONY
008 017 THOMPSON
003 009 TOSHIBA
013 YAMAHA
004 026 ZENITH
021
005 006
005 006
011 015
Codes
007
005 006
019 008
009 018
010 016 025