Programming The Remote Control; Programming Code - LG M2362DP-PC Owner's Manual

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or universal remote. It can be programmed to operate most remote-control-
lable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Cleaning the Screen
1
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on
the component such as a VCR and press the corresponding mode button (such as a DVD or VCR)
on the remote control, while pointing at the component. Test the POWER and P ꕌꕍ buttons to see
if the component responds properly. If not, the remote requires programming to operate the device.
2 Turn on the component to be programmed, then press the corresponding mode button (such as a
DVD or VCR) on the remote control. The remote control button of desired device is lighted.
3
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed
for the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers
for the corresponding component can be found on the following pages. Again, if the code is correct,
the device will turn off.
5
Press the MENU button to store the code.
6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2.

PROGRAMMING CODE

DVD
Brand Codes
APEX DIGITAL 022
DENON 020 014
GE 005 006
HARMAN KARDON 027
JVC 012
LG 001 010 016 025
MAGNAVOX 013
MARANTZ 024
MITSUBISHI 002
Brand Codes
NAD 023
ONKYO 008 017
PANASONIC 003 009
PHILIPS 013
PIONEER 004 026
PROCEED 021
PROSCAN 005 006
RCA 005 006
SAMSUNG 011 015
Brand Codes
SONY 007
THOMPSON 005 006
TOSHIBA 019 008
YAMAHA 009 018
ZENITH 010 016 025
143