Wall Mount : Horizontal Installation - LG M2380DB-PZ Owner's Manual

WALL MOUNT : HORIZONTAL INSTALLATION

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
When you install the set using the wall mounting interface (optional parts), attach it carefully so it will not drop.
1. Be sure to use screws and a wall mount that meet VESA standards.
2. Using screws longer than those recommended might damage the product.
3. Using screws that do not meet VESA standards might either damage the product or result in it coming
away from the wall. We will not be held responsible for any damage resulting from failure to follow these
instructions.
4. VESA compatible only with respect to screw mounting interface dimensions and mounting screw speci-
fications
5. Please use VESA standard as below.
5-1) 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm
5-2) 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws.
< Screw Mounting Interface Dimension >
● M2080D / M2280D / M2380D: 75 mm x 75 mm hole spacing
● M2080DF / M2280DF / M2380DF: 75 mm x 75 mm hole spacing
● M2080DB / M2280DB / M2380DB: 75 mm x 75 mm hole spacing
● M2080DN / M2280DN / M2380DN: 75 mm x 75 mm hole spacing
● M2780D / M2780DF / M2780DN: 100 mm x 200 mm hole spacing
10 cm
10 cm
10 cm
10 cm
10 cm
Wall Mount Pad
15