Making Wi-Fi Settings By Push Button Setup - Epson Expression Home XP-2105 User Manual

User's Guide
Related Information
"Making Wi-Fi Settings by Push Button Setup" on page 24
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 25
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 26
&

Making Wi-Fi Settings by Push Button Setup

You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏ The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏ The current Wi-Fi connection was established by pressing a button on the wireless router.
1. Hold down the [WPS] button on the wireless router until the security light flashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
2. Hold down the button on the printer for at least five seconds until the
alternately.
The connection setting will start. When a connection is established, the
Note:
The printer is in a connection error status when the
the printer error by pressing the
again. If it still does not work, print a network connection report and check the solution.
Network Settings
light and the
button on the printer, reboot the wireless router, place it close to the printer and try
24
light and the
light turns on.
light flash simultaneously. After clearing
light flash