Specifications - Panasonic PT D4000E Operating Instructions Manual

Specifications

Model No.
Power supply
Power consumption
Amps
DLP panel
®
Panel size
Display system
Number of pixels
Lens
Powered zoom
Powered focus control
Projection lamp
Optical output
Applicable scanning frequency
For Video signal (S-Video included)
For RGB signal
For DVI-D signal
For YP P signal
B R
Color system
Screen size
Screen aspect ratio
Projection scheme
Contrast ratio
Interface ports
RGB1 input terminal
* THDCP (High-bandwidth Digital Content Protection)
1
HDCP is a digital video signal encryption system developed with the aim of protecting digital content.
* 2 When using ET-DLE050 lens, the maximum screen size is 200 inch.
56
AC 120 V, 50 Hz/60 Hz
540 W (about 10 W in standby without fan running)
0.7 inch (aspect ratio 4:3)
DLP
786 432 pixels (1 024 x 768 dots)
1 to 1.32
F=1.7 to 2.0 f=25.6 mm (1") to 33.8 mm (1.3")
2 bulbs x 210 W UHM lamp
Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz
Horizontally 15 kHz – 91 kHz, vertically 50 Hz – 85 Hz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency less than 150 MHz
Compliant with HDCP*
1
480p, 576p, 1080/60i, 1080/50i, 720/60p, 720/50p, 1080/60p, 1080/50p
VGA60, SVGA60, XGA50, XGA60, XGA70, XGA75, XGA85,
XGA89, SXGA60
[480i], horizontally 15.73 kHz, vertically 59.94 Hz
[480p], horizontally 31.5 kHz, vertically 59.94 Hz
[576i], horizontally 15.63 kHz, vertically 50 Hz
[576p], horizontally 31.25 kHz, vertically 50 Hz
[720/60p], horizontally 45 kHz, vertically 60 Hz
[720/50p], horizontally 37.5 kHz, vertically 50 Hz
[1080/60p], horizontally 67.5 kHz, vertically 60 Hz
[1080/50p], horizontally 56.25 kHz, vertically 50 Hz
[1035/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/50i], horizontally 28.13 kHz, vertically 50 Hz
• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Menu-selectable from front/rear/ceiling mount, and floor standing
1 600:1 (when "HIGH" is selected as the "CONTRAST MODE" setting)
1 set, BNC x 5
[For YP P input]
B R
Y: 1.0 V[p-p] synchronization signal included, P
[For RGB input] 0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
PT-D4000U
Maximum 5 A
® chip x 1, DLP ® type
4 000 lm
50 inch – 600 inch* 2
4:3
P
B
: 0.7 V[p-p] 75 Ω
R