Table of Contents
Advertisement
3-6
Installing the Hard Disk Drive
Read the following guidelines before you begin to install the Hard disk drive:
• Take note of the drive tray orientation before sliding it out.
• The tray will not fit back into the bay if inserted incorrectly.
• Make sure that the HDD is connected to the HDD connector on the backplane.
Follow these instructions to install a 3.5" hard disk drive:
1.
Press the release button.
2.
Extend the locking lever.
3.
Pull the locking lever to remove the HDD tray.
4.
Pull apart the HDD tray.
5.
Slide hard disk into the tray.
6.
Push together to secure the hard drive.
Pull
System Hardware Installation
2
3
4
Pull
Push
1
6
Push
- 30 -
5
Advertisement
Table of Contents
