BT BT6610 Quick Setup And User Manual page 82

No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider?
See page 40.
• The caller may have withheld their number.
• Network may not have the callers number information.
• An exact name/number match was not found in your contacts. Check that you've
stored the full STD dialling code.
Can't register a handset to a base
• You can register up to six handsets to your BT6610 base and your BT6610
handset can only be registered to one base. Check that you've not exceeded
the limits.
• Check that you've entered the correct system PIN number (default PIN 0000).
• Check that you're at least one metre away from other electrical equipment to
avoid interference when registering.
Base unit does not ring, but the lights are on
• Have you connected the telephone line correctly?
• Do Not Disturb may be switched on, see page 28.
• Block nuisance calls may be switched on, see page 29.
• Is the base ringer set to off?
• You may have a faulty line or socket. Try using another socket or line.
If you are a BT customer then please call 0800 800 151 or your network provider
if you still have problems.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Help 82