Advertisement
4 Hold the end of the cool tip (
the section of hair round the barrel from end to root.
5 Hold the barrel in the position for max. 10 seconds, and then
unwind the section of hair until you can remove the conical curling
attachment (
6 To style the rest of your hair, repeat steps 2 to 5.
Create waves (Fig.7)
1 Select the small curling attachment (
brush (
2 Wind a section of hair round the brush.
3 Hold the barrel in the position for max.10 seconds. Then unwind the
section of hair to remove the Slide-on brush (
4 To style the rest of your hair, repeat steps 2-3.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Remove hairs and dust from the appliance and attachments.
4 Clean the appliance and attachments by damp cloth.
5 Keep the appliance in a safe and dry place, free of dust. You can also
hang it with the hanging loop (
resistant pouch (
3
Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you find
its phone number in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.
) from your hair.
) onto barrel (
).
) and the handle (
). Then slide the Slide-on
).
) or store it in the supplied heat
). Then wind
) from your hair.
Advertisement
