Table of Contents
Advertisement
Making Copies
This section describes the procedure to copy with Standard copy.
1.
Make sure printer is turned on.
2.
Load paper.
3. Select
Copy on the HOME screen.
Using the Operation Panel
4. Select
Standard copy.
The Copy standby screen is displayed.
5.
Load original on platen glass.
6. Specify settings as necessary.
A. The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B. Tap to specify the number of copies.
1. Flick to specify the number of copies.
261
Advertisement
Table of Contents
