Table of Contents
Advertisement
3. Select
Device settings.
4. Select LAN settings.
5. Select Wireless LAN.
6. Select WLAN active/inactive.
7. Select Active.
If you do not use the printer over wireless LAN, select Inactive.
Changing Wireless Direct Setting
Change the settings for the Wireless Direct following the procedure below.
1.
Make sure printer is turned on.
2. Select
Setup on the HOME screen.
Using the Operation Panel
3. Select
Settings.
4. Select
Device settings.
5. Select LAN settings.
6. Select Wireless Direct.
7. Select a setting item.
• To update the identifier (SSID) and the password for Wireless Direct
254
Advertisement
Table of Contents
