Table of Contents
Advertisement
ENGLISH (Original instructions)
SPECIFICATIONS
Strokes per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Do not expose to rain.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of the European Directives,
on
Waste
Equipment
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The
typical
A-weighted
according to EN60745:
Model UH420D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Model UH480D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Model
Blade length
-1
)
Overall length
Net weight
Rated voltage
Electric
and
and
Batteries
noise
level
determined
) : 74 dB (A)
pA
) : 82.5 dB (A)
WA
) : 75 dB (A)
pA
) : 83.2 dB (A)
WA
UH420D
420 mm
823 mm
2.9 kg
D.C. 14.4 V
END013-4
Model UH520D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Vibration
The
vibration
determined according to EN60745:
Work mode : hedge trimming
Electronic
Vibration emission (a
and
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
ENE014-1
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
ENG905-1
Be sure to identify safety measures to protect the operator
•
that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Hedge Trimmer
Model No./ Type: UH420D,UH480D,UH520D
Specifications: see "SPECIFICATIONS" table.
2
UH480D
UH482D
480 mm
480 mm
1,350
873 mm
879 mm
3.0 kg
3.0 kg
D.C. 18 V
) : 75 dB (A)
pA
) : 82.9 dB (A)
WA
Wear ear protection
total
value
(tri-axial
) : 2.5 m/s
h
2
UH520D
UH522D
520 mm
520 mm
923 mm
929 mm
3.0 kg
3.1 kg
D.C. 14.4 V
D.C. 18 V
ENG900-1
vector
sum)
2
ENG901-1
ENH040-4
Advertisement
Table of Contents
