AEG COMPETENCE D4100A Operating And Installation Instructions page 10

Build-in electric multifunction double oven
Table of Contents

Advertisement

B) TO SET THE TIMER TO SWITCH OFF
ONLY
i)
Ensure the electricity supply is switched ON
and that the correct time of day is
displayed, e.g. 10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button (
down, depress the increase control ( + )
until the required length of cooking time is
displayed, e.g. 2 hrs 15 mins as Fig. 10.
Depress
the
necessary.
iv) Release the buttons. The AUTO
will glow and the time of day will be
displayed after 5 seconds.
v) Select required main oven function and set
temperature. The oven indicator neon and
selector neon will be on.
vi) To check the stop time during the cooking
period, simply press the stop time button
(
) and the stop time will be displayed,
as Fig. 11.
4. TO
CANCEL
PROGRAMME
i)
To cancel an automatic programme, press
(
) button. The AUTO display will go out
and the cookpot symbol will light,
Fig.12.
Turn off oven controls.
5. TO
RETURN
MANUAL
At the end of a timed cooking period, the AUTO
display will flash and an alarm will sound for up
to 7 minutes.
i)
To stop the sound press any of the first
three buttons, as Fig. 13.
ii) Turn off the oven controls. AUTO display
will continue to flash.
iii) Press (
) button. See Fig. 14.
The AUTO display goes out and the
cookpot symbol will show.
Turn the oven temperature control on and
select function to check the oven operates
manually. The Selector and oven indicator neon
will glow. Turn off all oven controls.
), while holding it
decrease
control
(-)
display
AN
AUTOMATIC
THE
COOKER
Fig. 9
if
Fig. 10
Fig. 11
as
TO
Fig. 12
Fig. 13
Fig. 14
9

Advertisement

Table of Contents
loading

Table of Contents