Electrolux EWF12763E User Manual page 33

Table of Contents

Advertisement

For correct functioning of the machine
the drain hose must remain hooked on
the proper support piece situated on the
top part of back side of the appliance.
11.5 Electrical Connection
This machine is designed to
operate on a 220-240 V,
single-phase, 50 Hz supply.
"An incorrect power supply
may void your warranty."
Check that your domestic
electrical installation can take the
maximum load required (2.0 kW),
also taking into account any other
appliances in use.
CAUTION!
Connect the machine to
an earthed socket outlet.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precaution.
If the supply cord is
damaged, should the
appliance power supply
cable need to be
replaced, this shall be
carried out by our
Service Centre.
When the appliance is installed
the power supply cable must be
easily accessible.
If this appliance is supplied from a
cord extension set or electrical
portable outlet device, the cord
extension set or electrical portable
device must be positioned so that
it is not subject to splashing or
ingress of moisture.
33

Advertisement

Table of Contents
loading

Table of Contents