Table of Contents
Advertisement
20
www.electrolux.com
Any fabric softener or starching
additives must be poured into the
compartment marked "
starting the wash program.
Follow the product manufacturer's
recommendations on quantities to
use and do not exceed the MAX
mark in the detergent dispenser
drawer.
Do not spray stain
pre-treatment products (e.g.
Preen) on or near the machine,
as it can attack plastic
materials reducing its life.
6.7 Quantity of Detergent
To Be Used
Water hardness is classified in
so-called "degrees" of hardness.
Information on hardness of the
water in your area can be obtained
from the relevant water supply
company, or from your local
authority.
Follow detergent manufacturers
instructions on recommended
dosage of detergent.
Not enough washing powder
causes:
" before
Too much washing powder
causes:
Use less detergent if:
Use only front load type
detergents and reduce the
amount of detergent if
oversudsing occurs.
the washload to turn grey,
greasy clothes.
sudsing,
reduced washing effect,
inadequate rinsing.
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form
during washing.
NOTE:
Advertisement
Table of Contents
