Electrolux EWF12763E User Manual page 16

16 www.electrolux.com
5.2 Interruption Of A Program
5.3 Changing A Program
Changing a running program is
possible only by switching off the
appliance.
5.4 Changing The Options
1.
2.
3.
5.5 Opening The Door
While a program or the Delay End
is operating, the appliance door is
locked and the door lock indicator
"
First set the machine to PAUSE by
pressing the "Start/Pause"
touchpad. Wait until the door lock
indicator "
door can be opened.
To pause press Start/Pause.
The indicator will start flashing.
Press the Start/Pause again.
The program will continue.
Press the "On/Off" button to
cancel the program and to turn
off the appliance.
Press the "On/Off" button again
to start the appliance. Now, you
can set a new washing
program.
The appliance will not drain the
water.
Once the wash program has
started, only some of the options
can be changed. Machine will
display " " if selected option
is not available.
Press Start/Pause to pause. The
indicator will start flashing.
Change the options.
Press Start/Pause again. The
program will continue.
" is on.
" goes off, then the
If the door lock indicator "
does not disappear, this means
that the machine is already
heating and the water level is
above the bottom edge of the
door or the drum is turning. In
this case the door CAN NOT be
opened. If you need to open it, you
must drain the water to open the
door.
To drain the water, you have to
switch the machine off by pressing
the "On/Off" button to deactivate
the appliance. Turn On the
machine and select "Drain & Spin"
option, then press Start/Pause
touchpad to start the program.
You can select "No Spin", if
you want the machine to
only drain the water.
When the program is completed
and the door lock indicator "
goes off, you can open the door.
5.6 When The Washing Program
Is Completed, But There Is
Water In The Drum
(Option "Rinse Hold" is used)
The drum turns regularly to
prevent the creases in the
laundry.
The indicator "Start/Pause"
flashes to remind you to drain
the water.
The door lock indicator "
on. The door stays locked.
You must drain the water to open
the door.
To drain the water:
1. Press the "Start/Pause
touchpad. The appliance drains
the water and spins with the
maximum spin speed for
selected program.
"
"
" is
"