Safety and Notice The HDM-SPL-2422DS 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HDM-SPL- 2422DS should be used with care.
(1) Resolution downscaling from 4K2K@60 4:2:2 to 1080P (2) Frame rate conversion (3) 4K2K@60 4:2:2 to 4K2K@60 4:2:0 2. HDM-SPL-2422DS can bypass 4K HDR data content, but can NOT process it and make HDR content 100% fit into 1080p PACKAGE CONTENTS ●...
PANEL DESCRIPTIONS Front Panel EDID MODE: See more detail in the DIP SWITCH SETTING section Mini-USB: For technical support only [firmware update] Power LED:Lights on when device is ready Signal LED: Input signal LED indicator :Output 1-2 signal LED indicator Signal LED Rear Panel HDMI IN: Connect to a HDMI input source...
NOTICE 1. If somehow user cannot get video output, please try to adjust EDID dip switch to “[pin2,pin3,pin4]=[ ]” or “[pin2,pin3,pin4]=[ ]” for trouble shooting. Under “[pin2,pin3,pin4]=[ ]”, there will be video ...
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the HDM-SPL-2422DS features and specifications is subject to change without further notice.
Need help?
Do you have a question about the HDM-SPL-2422DS and is the answer not in the manual?
Questions and answers