Disc Settings - LG RHT599H Manual

DISC SETTINGS

DISPLAY SET UP MENU
a) Press HOME [ ]. First menu is displayed.
b) Press [ ] until Easy Menu is displayed
c) Select SETUP
d) Press OK [ ] to display set up menu
FORMATTING
To format a DVD:
• Load disc in drive. If disc is blank, disc will be
initialized automatically.
To re-format a used disc:
i Display set up menu (see Displaying Set Up Menu)
ii Auto Programming is highlighted. Select Disc Format option
from the left panel
iii Select Disc Format from middle panel
iv Select mode: VR and Video for DVD-RW discs from right panel
v Press OK [ ] to confi rm. Formatting starts.
Everything recorded on the DVD will be erased after formatting.
FINALISING
Newly recorded discs must be fi nalised to work on other DVD players.
RAM Finalisation not required
+RW Discs are automatically fi nalised when removed from Unit
-RW Finalised discs can be unfi nalised for re-recording or editing
+R - R Finalised discs cannot be edited or re-recorded
To fi nalise a disc:
a) Load disc in drive.
b) Display set up menu (see Displaying Set Up Menu)
c) Auto Programming is highlighted. Select Disc Format option
from left panel
d) Select Finalise from middle panel
e) Press OK [ ] to confi rm. Finalisation starts.
Time taken depends on disc condition, recording length and
LG RHT49X instructions.indd Sec1:26 LG RHT49X instructions.indd Sec1:26
number of titles
To unfi nalise a disc:
a) Load disc in drive
b) Display set up menu (see Displaying Set Up Menu)
c) Auto Programming is highlighted. Select Disc Format option
from left panel
d) Select Unfi nalise from middle panel
e) Press OK [ ] to confi rm
LABELLING
To change disc name:
a) Load disc in drive). Disc information is displayed.
b) Display set up menu (see Displaying Set Up Menu)
c) Auto Programming is highlighted. Select Edit from middle panel
d) Press OK [ ] to confi rm. Keyboard menu is displayed.
e) Use [ ] to navigate keyboard and press
OK [ ] on remote control to confi rm each key selection
f) Select OK on keyboard menu to confi rm new name
PROTECTING
To protect a disc (except DVD-R Video mode and DVD-RW) against
accidental recording, editing or erasure:
a) Load disc in drive). Disc information is displayed.
b) Display set up menu (see Displaying Set Up Menu)
c) Auto Programming is highlighted. Select Disc Format option
from left panel
d) Select Protect from middle panel
e) Select ON from right panel
f) Press OK [ ]
26
2009-03-04 2009-03-04 3:50:17 3:50:17