Software Update & System Information - LG RHT599H Manual

SOFTWARE UPDATE &
SYSTEM INFORMATION
DISPLAY SET UP MENU
a) Press HOME [ ]. First menu is displayed.
b) Press [ ] until Easy Menu is displayed
c) Select SETUP
d) Press OK [ ] to display set up menu
RECEIVING SOFTWARE UPDATE
• Ensure Unit is plugged into AC power to receive updates.
Updates are not available during recording, Timeshift and when
viewing digital text or EPG menu.
To set software update options:
a) Display set up menu (see Displaying Set Up Menu)
b) Select network icon at bottom of left panel
c) Select Software Updates from middle panel
d) Select option in right panel:
• Standby mode: Update software when Unit is turned off
• Operation Mode: Update software when Unit is turned on:
i Time: Set time to update software
ii Freq: Select update interval
iii Start: Update software immediately
e) Enter information if required and press OK [ ]
SYSTEM INFORMATION
To display system information:
a) Display set up menu (see Displaying Set Up Menu)
b) Select network icon at bottom of left panel
c) Select System Information from middle panel. System
information is displayed in right panel.
LG RHT49X instructions.indd Sec1:27 LG RHT49X instructions.indd Sec1:27
DTV DIAGNOSTICS
To view diagnostic information:
a) Display set up menu (see Displaying Set Up Menu)
b) Select network icon at bottom of left panel
c) Select DTV Diagnostics from middle panel.
d) Select START in right panel
e) Press OK [ ]. Diagnostic information is displayed.
f) To display information about a multiplex:
• Select multiplex
• Press OK [ ]
27
2009-03-04 2009-03-04 3:50:17 3:50:17