Connecting The Soundbar; Connecting The Power And Units; Manually Connecting The Subwoofer - Samsung HW-Q700A Full Manual

04 CONNECTING THE SOUNDBAR

Connecting the power and units

Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order:
• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom
of the Soundbar Main Unit)
1. Connect the Power cord to the Subwoofer.
2. First connect the power cable to the AC/DC adapter.
Connect the AC/DC adapter (with the power cable) to the Soundbar.
3. Connect power to the Soundbar and Subwoofer. The Subwoofer is automatically connected when the Soundbar is turned on.
NOTE
• Connect the Subwoofer power before connecting to the Soundbar.
The Subwoofer will be automatically connected when turning on the Soundbar.
• If you unplug and reconnect the power cord when the product is turned on, the Soundbar turns on automatically.
• Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input
facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

Manually connecting the Subwoofer

Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer are connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
POWER
Rear of Subwoofer
Power Cord
AC/DC Adapter
ENG - 13
NETWORK
DIGITAL AUDIO IN
Power Cord (OPTICAL)
SERVICE
DC 19V
DC 19V
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DIGITAL AUDIO IN
(OPTICAL)
NETWORK
DIGITAL AUDIO IN
DC 19V
(OPTICAL)
SERVICE
SERVICE
DC 19V
Bottom of the Soundbar
Main Unit
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DIGITAL AUDIO IN
(OPTICAL)
DC 19V
SERVICE
ID SET
HDMI
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN
NETWORK ID SET
(OPTICAL)
HDMI IN
SERVICE
ID SET
HDMI OUT
HDMI TO TV
(TV-ARC)
DC 19V (eARC/ARC)
DIGITAL AUDIO IN
NETWORK ID SET
(OPTICAL)
HDMI IN
Blue is On
SERVICE
HDMI OUT
(TV-ARC)
DC 19V
HDMI
HDMI
HDMI TO TV
(eARC/ARC)
HDM
HDMI TO TV
(eARC/ARC