Samsung HW-Q700A Full Manual page 10

Hide thumbs Also See for HW-Q700A:
Table of Contents

Advertisement

Available languages

Available languages

7
Press Up/Down/Left/Right on the button to select or set functions.
• Music Skip
Up/Down/Left/
Right
• ID SET
8
When pressed, the setting items such as TREBLE, BASS, SYNC, CENTER LEVEL, FRONT TOP LEVEL, and VIRTUAL
ON/OFF are displayed in sequence. The desired item can be adjusted using the Up/Down buttons.
• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust
Sound Control
• Press and hold the
• To control the volume of the each speaker select CENTER LEVEL, or FRONT TOP LEVEL in Sound Settings, and
• If the video on the TV and audio from the Soundbar are not synchronized, select SYNC in Sound Control, and
• SYNC is only supported for some functions.
• If Surround Speakers are connected, select REAR LEVEL, REAR TOP LEVEL, and then use the Up/Down buttons
• The VIRTUAL Speaker function can be turned ON/OFF by using the Up/Down buttons.
9
WOOFER (BASS)
LEVEL
Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer
(bass) volume level to 0 (Default), press the button.
10
VOLUME
Push the button up or down to adjust the volume.
• Mute
Press the indicated areas to select Up/Down/Left/Right.
Press the Right button to select the next music file. Press the Left button to select the previous music file.
Use this option when the Subwoofer or Surround Speakers are not connected or need reconnection.
While powered off, press and hold the Up button for 5 seconds to perform ID SET. (See page 14.)
the volume between -6~+6 by using the Up/Down buttons.
(Sound Control) button for about 5 seconds to adjust the sound for each frequency band.
150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each
can be adjusted to a setting between -6 to +6 using the Up/Down buttons.
(Make sure the Sound mode is set to "STANDARD".)
then adjust the volume between -6~+6 by using the Up/Down buttons.
then set the audio delay between 0~300 milliseconds by using the Up/Down buttons.
to adjust the volume within a -6 to +6 range.
Press the VOL button to mute the sound. Press it again to unmute the sound.
ENG - 10

Advertisement

Chapters

Table of Contents
loading

Table of Contents