Software Update; Auto Update; Usb Update; Initialization - Samsung HW-Q700A Full Manual

13 SOFTWARE UPDATE

Auto Update

When the Soundbar is connected to the Internet, software updates
automatically occur even when the Soundbar is turned off.
• To use the Auto Update function, the Soundbar must be connected
to the Internet.
The Wi-Fi connection to the Soundbar will be terminated if
the Soundbar's power cord is disconnected or the power is cut
off. If the power is cut off, when the power comes back on or
you reconnect the power cord, turn on the Soundbar, and then
reconnect it to the Internet.

USB Update

Bottom of the Soundbar
Micro USB to USB adapter Cable (not
supplied)
Samsung may offer updates for the Soundbar's system firmware in the
future.
When an update is available, you can update the Soundbar by
connecting the USB drive that contains the update firmware to the
SERVICE port of the Soundbar.
1. Go to the Samsung Electronics website (www.samsung.com) →
search for the model name from the customer support menu
option.
• For more information about update, refer to Upgrade Guide.
2. Download the upgrade file (USB type).
3. Unzip the file to create a folder with the file name.
4. Store the created folder in a USB and then connect it to the
Soundbar.
5. Turn on the Soundbar. Then the product is updated within 3
minutes with displaying the message, "UPDATE".
• During update, do not turn it off or remove the USB.
• If "UPDATE" does not appear on the display window, remove the
power cord from the Soundbar and then reconnect it.
• When the latest version is installed, no update is performed.
• Depending on the USB type, update may not be supported.
NETWORK ID SET
DIGITAL AUDIO IN
DIGITAL AUDIO IN
(OPTICAL) HDMI
SERVICE
(OPTICAL)
HDMI TO TV
DC 19V (eARC/ARC) HDMI IN
SERVICE
HDMI OUT
DC 19V (TV-ARC)

Initialization

With the Soundbar on, press the
at the same time for at least 5 seconds. "INIT" appears on the display
and then the Soundbar is initialized.
CAUTION
• All the settings of the Soundbar are initialized. Be sure to
perform this only when initialization is required.
ENG - 29
Top of the Soundbar
INIT
(Volume) buttons on the body