Table of Contents
Advertisement
16 Frequently
asked questions
No signal bar is displayed on the screen.
•
The handset is out of range. Move it closer
to the base station.
•
If the handset displays [Register your
Handset], register your handset.
Tip
•
For further information, see the chapter 'Services',
section 'Register additional handsets'.
My extra charger does not display the same
information as the base station.
•
Make sure that both power adapters of
the extra charger and the base station are
plugged to the power source.
•
The extra charger is out of range. Place it
closer to the base station.
If I fail to pair (register) the additional
handsets to the base station, what do I do?
Your base memory is full. Unregister the unused
handsets and try again.
Tip
•
For further information, see the chapter 'Services',
section 'Unregister the handsets'.
My handset is in searching status, what do I
do?
•
Make sure that the base station has power
supply.
•
Register the handset to the base station.
•
Move the handset closer to the base
station.
I have chosen a wrong language which I cannot
read, what do I do?
1
Press
to go back to the standby screen.
2
Press MENU/OK to access the main menu
screen.
3
One of the following texts appears on the
screen:
Réglages > Langue
Phone setup > Language
Config. telef. > Lingua
Telefon-Setup > Sprache
4
Select it to access the language options.
5
Select your own language.
The handset loses connection with the base
or the sound is distorted during a call.
Check if the ECO+ mode is activated. Turn it
off to increase the handset range and enjoy the
optimal call conditions.
No dialing tone.
•
Check your phone connections.
•
The handset is out of range. Move it closer
to the base station.
No docking tone.
•
The handset is not placed properly on the
base station/charger.
•
The charging contacts are dirty. Disconnect
the power supply first and clean the
contacts with a damp cloth.
I cannot change the settings of my voice mail,
what do I do?
The voice mail service is managed by your
service provider but not the phone itself.
Contact your service provider to change the
settings.
EN
39
Advertisement
Table of Contents
