14
English
2
1
Cleaning and maintenance
2 Turn the hair length setting wheel to select the
desired hair length setting.
The settings on the wheel correspond to the
hair lengths in millimeters.
- QP6520
- QP6510
3 Switch on the appliance.
4 Place the comb onto the skin and move the
appliance upwards slowly, against the grain.
5 Switch off and clean the appliance after every
use (see 'Cleaning and maintenance').
6 To remove the comb, pull its back part off the
appliance and then slide it off the blade.
Clean the appliance after every use.
Caution: Never use compressed air, scouring
pads, abrasive cleaning agents or aggressive