Table of Contents
Advertisement
SERIAL PORT
IN TERMINAL
If you control a projector by computer,
you must connect a cable (not provided)
from your computer to this terminal.
DVI
R/Pr
G/Y
B/Pb
C
VIDEO/Y
SERIAL PORT IN
R/C JACK
RESET
When using Wired / Wireless Remote
Control Unit as Wired Remote
Control, Connect Wired Remote
Control Unit to this jack with Remote
Control Cable (supplied). (Refer to
page 18.)
RESET BUTTON
This projector uses a micro processor to control a
unit. Occasionally, this micro processor may
malfunction and need to be reset. This can be done
by pressing RESET button with a pen, which will
shut down and restart unit. Do not use RESET
function excessively.
SERIAL PORT
OUT TERMINAL
This terminal outputs signal from
SERIAL PORT IN. More than two
projectors can be controlled with one
computer by connecting SERIAL PORT
IN. of another projector to this terminal.
AUDIO
CONTROL PORT
R
L
(MONO)
AUDIO
CONTROL PORT
H/HV
V
R
L
(MONO)
AUDIO
S-VIDEO
R
L
(MONO)
AUDIO OUT
SERIAL PORT OUT
R
L
(MONO)
R/C JACK
CONNECTING PROJECTOR
USB PORT (Series B)
This port is used to control a projector
with computer. It is also used to
control computer with Remote Control
USB
of this projector.
(Refer to P40-42.)
Connect USB port of computer to this
port.
AUDIO OUTPUT JACKS
Connect an external audio
amplifier to these jacks.
(Refer to P14, 15.)
13
Advertisement
Table of Contents
