LG 43UF77 Series Owner's Manual page 8

As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn o this unit by SWITCH.
When unplugging the cable, grab the plug and
unplug it, by pulling at the plug.
Don't pull at the cord to unplug the power
cord from the power board, as this could be
hazardous.
When moving the product, make sure you turn
the power o rst. Then, unplug the power
cables, antenna cables and all connecting
cables.
The TV set or power cord may be damaged,
which may create a re hazard or cause electric
shock.
When moving or unpacking the product,
work in pairs because the product is heavy.
Otherwise, this may result in injury.
Contact the service centre once a year to clean
the internal parts of the product.
Accumulated dust can cause mechanical failure.
8
Refer all servicing to quali ed service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
If the product feels cold to the touch, there may
be a small " icker" when it is turned on. This is
normal, there is nothing wrong with product.
The panel is a high technology display product
with resolution of two million to six million
pixels. You may see tiny black dots and/or
brightly coloured dots (red, blue or green) at
a size of 1 ppm on the panel. This does not
indicate a malfunction and does not a ect the
performance and reliability of the product.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.