Table of Contents
Advertisement
Extend Window Filler
6
Panels
1. Carefully raise window to expose filler panel locking
screws. Loosen screws so filler panels slide easily.
LOCKING SCREWS
2. Extend panels to fill window opening completely.
Tighten locking screws on top.
3. Close window behind top angle.
Install Window Lock
7
and Sash Seal
1. Trim sash seal to fit window width. Insert into space
between upper and lower sashes.
2. Attach right angle safety lock as shown.
WINDOW SASH SEAL
SAFETY LOCK
3/4''long hex-
head screw
Install Chassis into
8
Cabinet and Install
Front to Unit
1. Lift chassis and carefully slide it into installed cabinet.
2.
DO not push on controls OR finned coils.
CAUTION
!
3. Be sure chassis is firmly seated towards rear of
cabinet.
4. Refer to Owner's Guide for front installation.
5
Advertisement
Table of Contents
