Download Print this page

Safety Instructions; Name Of Each Part; How To Use This Product; After Use - Panasonic Zigzag EH5202P Operating Instructions Manual

Advertisement

Safety Instructions

Before operating this product, please read these safety instructions. The safety instructions explained
here are to help you use this product safe and correctly, and to prevent danger or injury to yourself or
other people.
The safety instructions shown here are classified by follows. As they are very important for your safe-
ty, be sure to follow both of them.
WARNING:
Indicates contents which may lead to death or serious injury.
CAUTION: Indicates contents which may lead to serious personal injury
or damage to property.
After reading these instructions, store the manual where it is always accessible by the user.
WARNING
After use, always turn the power switch of the product to [off], then unplug from the power
● 
socket. Failure to do so may result in a fire and / or accident.
 
Turn the voltage selector switch to match the applicable voltage of the local region. Failure to
● 
do so may result in a fire and / or electric shock.
 
Use only in regions supplying AC 100/120 V or 200/240 V power. Failure to do so may result
● 
in a fire and / or electric shock.
 
Do not use this product under the following conditions.
● 
*The product blows air intermittently.
 
*The cord or plug is damaged or becomes hot.
 
*It is loose to plug in a power socket.
 
There is a danger of fire, electric shock, short circuit and / or burns.
● 
Do not cut, damage or modify the power cord. Do not pull, bend or twist the cord with unnec-
● 
essary force. Do not place heavy objects on the cord or allow the cord to get pinched in be-
 
tween objects. Do not wind the cord around the product. There is a danger of a fire and / or
 
electric shock.
 
Do not block the air inlet or outlet, and do not insert foreign objects such as hair pins into
● 
them. There is a danger of a fire, burns and / or electric shock.
 
Do not use the product near inflammable materials (such as gasoline, benzene, paint thin-
● 
ner, sprays, etc.). There is a danger of an explosion or fire.
 
Store this appliance where children cannot reach it, and do not let children use it. There is
● 
danger of burns, electric shock or other injury.
 
Do not store this product in a bathroom or other location with high humidity. There is a dan-
● 
ger of electric shock and / or fire caused by insulation deterioration.
 
Do not leave this product in a place readily exposed to water (such as above the hand ba-
● 
sin). There is a danger of electric shock and / or fire caused by insulation deterioration.
 
● 
Never modify, disassemble or repair this product. There is a danger of injury from fire or ab-
normal operation.
 
Do not put this product in water. There is a danger of an electric shock and / or a short circuit.
● 
Do not use this product with wet hands. There is a danger of an electric shock and / or a
● 
short circuit.
CAUTION
Do not put the cord around the body after use. There is a danger of burns, fire and / or an ac-
● 
cident.
 
Do not put your hand directly on the hot air outlet. There is a danger that you may get burned. 
● 
Do not put this product down while it is still running. It may cause a fire.
● 
Do not use this product if the air inlet is damaged. There is a danger that you may get
● 
burned.
 
Use this appliance only for drying and styling human hair. Do not use the dryer on infants.
● 
There is a danger of burns, fire and / or an accident.
 
Do not use this product if you damage it by dropping or knocking it. This may cause an elec-
● 
tric shock and / or a fire.
 
When you unplug this product from the power socket, always turn the socket power switch
● 
off first, then hold on to the back of the plug as you pull it out. Failure to do so may result in a
 
fire, electrical shock and / or burns.
 
Take care not to touch the nozzle. It can get very hot and there is a danger that you may get
● 
burned.
 
During use, take care to avoid getting hair sucked into the air inlet. There is a danger that
● 
'
your hair may snap.
Name of Each Part (p. 5)
①Body ②Nozzle ③Air outlet ④Air inlet ⑤Handle ⑥Power switch  
⑦Voltage selector switch ⑧Storage hook ⑨Bushing ⑩Cord ⑪A-2 Plug  
⑫C-2 Plug adapter

How to Use This Product

Confirm your local mains voltage (Please refer to the enclosed "Table of World Volta-
ges and Plugs"), then adjust the voltage selector switch on the product.(Turn the
switch until it stops firmly.
●Do not use a 200/240V power supply with the voltage selector switch still
 set at 100/200V. It may cause a fire, burns or a malfunction.
1.Do not use this appliance with the voltage selector switch to the wrong setting.
1.Using the product in such countries where the local mains supply voltage
is 200/240V with voltage selector switch at 100/120V.
Do not do this. It may cause a breakdown. The windstream will stop. Turn the
power switch to [off], reset the voltage selector switch to 200/240V, then wait
4〜5 minutes before starting to use the product again.
2.Using the product in such countries where the local mains supply voltage
is 100/120V with voltage selector switch at 200/240V.
There is not a safety problem, but the product generates insufficient airflow for
drying and setting. Reset the voltage selector switch to 100/120V.
This product cannot be used with a power socket exclusively for shavers (power
sockets with the voltage controlled to low wattage), such as in hotels. Use another
power point.
2.Before use, check the shape of power socket (see the attached "Table of
World Voltages and Plugs"), then select the appropriate plug adapter.
    * In regions using the A-2 plug, you can use the product without a plug adapter.
3.Select the airstream with power switch.
TURBO...Strong airstream
set.........Gentle airstream
■Blowing (Drying) (p. 7)
1. Remove the water generally from your hair using a towel (to the extent that no
  water drips from your hair), and undo any tangled hair.
2. Remove the nozzle and set the power switch to [TURBO].
3. Apply the hot air all over your hair. (Apply the flow of hot air to the roots of your
  hair. It is more effective if you lift your hair with your fingers.)
■Setting (p. 7)
1. Moisten your hair with water. (Rub it in all over your hair.)
2. Install the nozzle, set the power switch to [set] and apply hot air to the hair you
  want to shape.
After Use (p. 8)
Remove grime from the dryer body by using a cloth wet with soapy water. Do not use
benzene, paint thinner or alcohol. There is a danger of a crack.
To clean the air outlet and air inlet, turn the power switch to [off], then clean them with
a toothbrush, etc. (more than once a month.)


Advertisement

loading