Philips EasyClean HX6511/33 Manual page 12

12
English
The Easy-start feature gently increases the power over the first 14
brushings to help you get used to the brushing with the Philips
Sonicare.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
Activating or deactivating the Easy-start feature
1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger.
To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2
beeps to indicate that the Easy-start feature has been activated.
To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 1
beep to indicate that the Easy-start feature has been deactivated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing
cycle.
Dental professionals recommend brushing no less than 2 minutes
twice a day.
If you want to pause or stop brushing during the 2-minute brushing
cycle, press the on/off button. Press the on/off button again and the
Smartimer picks up where you left off. The Smartimer automatically
resets to the beginning of a 2-minute cycle if:
- you stop brushing for 30 seconds or longer.
- you put the handle in the charger.
Quadpacer
The Quadpacer is an interval timer. At 30, 60 and 90 seconds, you
hear a short beep and pause in the brushing action. This is your signal
to move to the next section of your mouth.