Genelec 1238A Operating Manual
  1. Manuals
  2. Brands
  3. Genelec Manuals
  4. Monitor
  5. 1238A
  6. Operating manual

Genelec 1238A Operating Manual

Smart active monitors
Hide thumbs Also See for 1238A:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

1237A and
1238A
Operating Manual
Genelec 1237A and 1238A
Smart Active Monitors

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1238A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Genelec 1238A

Summary of Contents for Genelec 1238A

  • Page 1 1237A and Operating Manual 1238A Genelec 1237A and 1238A Smart Active Monitors...

  • Page 2: Mounting Considerations

    Manager GLM™ software. There are sure, and can also be detached and mounted The 1237A and 1238A are set up using the no setup controls on the amplifier panel. to a 19 inch rack. Digital signal processing GLM software.
  • Page 3 The monitor will power up again once a The RJ-45 sockets connect the monitor to RAM-L Amplifier signal is detected. The ISS setting is applied the proprietary Genelec Loudspeaker Man- Power Button to all ISS-enabled monitors in the currently ager™ (GLM™) network. Do not connect to The power button in the middle of the RAM-L selected Setup.
  • Page 4 Green light on the DCW panel of a 1237A LOUDSPEAKER CONNECTORS SERIAL NUMBER LED CONNECTOR WOOFER MIDRANGE / TWEETER or 1238A enclosure indicates normal opera- THRU tion. A yellow light indicates certain activities ANALOG DIGITAL IN DIGITAL THRU CONTROL NETWORK...

  • Page 5: Testing Mode

    The testing modes are not intended for outlet. continued operation. Use GLM software to set Free flow of air behind the monitor is up permanent settings for 1237A and 1238A. necessary to maintain sufficient cool- ing. Do not obstruct airflow around the Safety Considerations monitors.

  • Page 6: Maintenance

    Guarantee that may cause undesired operation. No user serviceable parts are to be found Genelec 1237A and 1238A are supplied with within the monitor enclosure or the RAM-L a two year guarantee against manufacturing Note: This equipment has been tested and amplifier unit.
  • Page 7 Figure 16. The upper curve group shows the horizontal directivity characteristics of the 1237A in its vertical configuration measured at characteristics of the 1238A in its vertical configuration measured at 2 m. The lower curve is a 1/6 octave smoothed power response.
  • Page 8 1237A and 1238A Operating Manual SySTEM SPECIFICATIONS AMPLIFIER SECTION 1237A 1238A 1237A 1238A Lower cut-off frequency, –3 dB < 35 Hz < 33 Hz Bass amplifier short term output 500 W power Upper cut-off frequency, –3 dB > 21 kHz >...

This manual is also suitable for:

1237a1238apm1237apm

Table of Contents