Aligning the DCW in Finland, using environmentally efficient cable kit: solutions to give you reliable operation The 1234A monitor is designed to be flush over many years. • One mains cable mounted in either the vertical or horizontal Please take the time to read this manual.
Page 3
The monitor enclosure has its acoustical axis midway between the midrange and treble drivers. This axis should be used as the listening and measuring axis of the system. (See Figure 1 and 2). The typical listening distance varies 660 mm 390 mm between 2 and 3.5 m (6½...
For a digital input signal of –30 dB FS, the release lever on the connector and your computer USB connector. The the 1234A monitors will produce a 100 dB turn the connector counterclockwise cable is a part of the GLM User Kit.
Page 5
The green light on the DCW panel of button light flashes rapidly, and lights input is +25.0 dBu. The analog input must a 1234A enclosure indicates normal on steadily when the turn-on has been not be overloaded, otherwise distortion operation. A yellow light indicates certain completed.
15 of the FCC Rules. These limits continued operation. Use GLM software to opened. are designed to provide reasonable set up permanent settings for the 1234A. • Do not use this product with an protection against harmful interference in unearthed mains cable or a mains a residential installation.
Page 7
• Consult the dealer or an experienced Figure 11. Horizontal directivity characteristics of the 1234A. The lower radio/TV technician for help. curve is the monitor's power response. Modifications not expressly approved by the manufacturer could void the user’s...
Page 8
2 LF and 2 HF System calibration Genelec GLM AutoCal™ www.genelec.com Genelec Document D0127R001a Copyright Genelec Oy 9.2015. All data subject to change without prior notice International enquiries: In China please contact: In the U.S. please contact: Beijing Genelec Audio Co.Ltd Genelec, Olvitie 5 Genelec, Inc., 7 Tech Circle...