Operating Sequence; Washing 4.5 Kg Of White Cotton At 95°C; Load The Laundry; Measure Out The Detergent - Electrolux Zanussi F1045 W Instruction Booklet

Operating Sequence

Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
If you wish to carry out the prewash, pour detergent into
the compartment marked
C0070
of
.
.
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.
C0071

4. Select the required option

Depress QUICK WASH button or SPIN REDUCTION
if required .
SPIN HALF
QUICK
REDUCTION
LOAD
WASH

5. Select the required programme

Turn the programme selector dial clockwise to the
programme B or A (if you wish to perform a prewash).
P1006S
7