8
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
or
DC-IN
19
3
10 cm
Using the cable holder
10 cm
DC-IN
19
Press
(Power) button on the bottom switch
panel to turn the power on.
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Fix the Knob (Cable holder) to the
1
Hole(Hingebody).
Use one screw to fix the Cable Holder and
2
monitor set.
Close the Cable holder.
3