Table of Contents
Advertisement
10
ASSEMBLING AND PREPARING
Swivel stand
Image shown may differ from your Monitor
y
set.
1
Swivel 355 degrees and adjust the angle of the
Monitor set to suit your view.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
Detaching the stand body
1
Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a screwdriver, remove the four screws
and detach the stand from the monitor.
Advertisement
Table of Contents
