Related Manuals for Philips B Series
Summary of Contents for Philips B Series
- Page 1 B Line 162B9 241B8 www.philips.com/welcome EN User manual Customer care and warranty 18 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
5.1 Resolution & Preset Modes ..16 6. Power Management ....17 7. Customer care and warranty .. 18 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy .....18 7.2 Customer Care & Warranty ..21 8. Troubleshooting & FAQs ..22 8.1 Troubleshooting ...... -
Page 3: Important
DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center. - Page 4 1. Important • Do not knock or drop the monitor • Unplug the monitor if you are not during operation or transportation. going to use it for an extensive period of time. • Excessive usage of monitor can cause eye discomfort, it’s better to • Unplug the monitor if you need to take shorter breaks more often at clean it with a slightly damp cloth.
-
Page 5: Notational Descriptions
1. Important known as “after-imaging” or “ghost 1.2 Notational Descriptions imaging”, on your screen. The following subsections describe • “Burn-in”, “after-imaging”, or notational conventions used in this “ghost imaging” is a well-known document. phenomenon in LCD panel technology. In most cases, the Notes, Cautions and Warnings “burn-in”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. -
Page 8: Operating The Monitor
2. Setting up the monitor Connect to PC 2.2 Operating the monitor Description of the control buttons 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer. - Page 9 "ON" mode: it On-Screen Display (OSD) is a feature makes the screen looks slightly dim; for in all Philips LCD monitors. It allows an optimum brightness, enter to the OSD end user to adjust screen performance to set "DPS"...
- Page 10 2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1366 x 768 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1366 x 768 for best results.
-
Page 11: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 12: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks. -
Page 13: Smartcontrast
3. Image Optimization • Photo: This profile combines color Note saturation, dynamic contrast and Philips LowBlue mode, mode 2 sharpness enhancement to display compliance with TUV Low Blue Light photos and other images with certification, you can have this mode by... -
Page 14: Smoothtouch
OS and applications which support touch functions, see the table listed above. • *Some operating systems require driver for the touch function. The driver is available in the CD disk or you can access them from the Philips website supporting pages. -
Page 15: Technical Specifications
5.Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight W-LED Panel Size 15.6" (39.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.252 (H) mm x 0.252 (V) mm Contrast Ratio (typ.) 500:1 Optimum Resolution 1366 x 768 @ 60 Hz Viewing Angle 90°... - Page 16 5.Technical Specifications English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, OSD Languages Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount (100 x 100 mm), Kensington Lock Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7 Stand Tilt...
- Page 17 2. *Some operating systems require driver for the touch function. The driver is avail- able in the CD disk or you can access them from the Philips website supporting pages. 3. In order to comply with international energy standards, power consumptions are under the PC/Display test mode and the monitor needs to connect with USB up- stream cable.
-
Page 18: Resolution & Preset Modes
5.Technical Specifications 5.1 Resolution & Preset Modes Recommended Resolution 1366 x 768 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 640 x 480 59.94 37.88 800 x 600 60.32 48.36 1024 x 768 44.77 1280 x 720 59.86 47.71 1366 x 768... -
Page 19: Power Management
6.Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 20: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 21 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 22 7.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 1 or fewer 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >5mm Total bright dot defects of all types 1 or fewer BLACK DOT DEFECTS ACCEPTABLE LEVEL...
-
Page 23: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 24: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the... -
Page 25: General Faqs
"burn-in", also Service contact information listed in known as "after-imaging " or "ghost Important information manual and imaging", on your screen. "Burn-in", contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to monitor panel technology. - Page 26 • Shut down your computer, that the panel surface is not disconnect your old monitor and subjected to excessive shocks reconnect your Philips LCD monitor. and is protected from sharp or • Turn on your monitor and then turn blunt objects. When handling the on your PC.
- Page 27 “burn-in” or “after- any PC, workstation or Mac? image” or “ghost image” symptoms that will not disappear and cannot be Ans.: Yes. All Philips LCD monitors are repaired. The damage mentioned above fully compatible with standard is not covered under your warranty.
-
Page 28: Smoothtouch
Information manual mentioned the screen to ensure fluid touch in EDFU? operation. Ans.: Important Information manual can be download on the Philips website support page. 8.3 SmoothTouch Why is the touch function not available when I touch the display? Ans.: Please ensure the supplied USB... - Page 29 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.