Related Manuals for Philips 242B9TL
Summary of Contents for Philips 242B9TL
- Page 1 B Line 222B9/242B9 241B8 www.philips.com/welcome EN User manual Customer care and warranty 19 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
5.1 Resolution & Preset Modes ..17 6. Power Management ....18 7. Customer care and warranty .. 19 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy .....19 7.2 Customer Care & Warranty ..22 8. Troubleshooting & FAQs ..23 8.1 Troubleshooting ...... -
Page 3: Important
• Please use approved power cord provided by Philips all the time. If your power cord is missing, please 1.1 Safety precautions and contact with your local service maintenance center. - Page 4 1. Important • Excessive usage of monitor can • Unplug the monitor if you need to cause eye discomfort, it’s better to clean it with a slightly damp cloth. take shorter breaks more often at The screen may be wiped with a your workstation than longer breaks dry cloth when the power is off.
-
Page 5: Notational Descriptions
1. Important • “Burn-in”, “after-imaging”, or 1.2 Notational Descriptions “ghost imaging” is a well-known The following subsections describe phenomenon in LCD panel notational conventions used in this technology. In most cases, the document. “burn-in” or “after-imaging” or “ghost imaging” will disappear Notes, Cautions and Warnings gradually over a period of time after Throughout this guide, blocks of text... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. - Page 8 2. Setting up the monitor Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
-
Page 9: Operating The Monitor
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. - Page 10 2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure This monitor is designed for optimal of the On-Screen Display. You can use performance at its native resolution, this as a reference when you want to 1920 x 1080 @ 60 Hz.
-
Page 11: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation. -
Page 12: Image Optimization
How does it work? • EasyRead: Helps improve reading SmartImage is an exclusive, leading of text based application like PDF edge Philips technology that analyzes ebooks. By using a special algorithm the content displayed on your screen. which increases the contrast and... -
Page 13: Smartcontrast
LED displays can cause great entertainment experience when eye damage and affect vision over viewing videos or playing games. time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage. -
Page 14: Smoothtouch
OS and applications which support touch functions, see the table listed above. • *Some operating systems require driver for the touch function. The driver is available in the CD disk or you can access them from the Philips website supporting pages. -
Page 15: Technical Specifications
≥ 85 % Transmission rate Touch interface Touch glass hardness Touch glass coating Haze 5% （ 242B9TL ） 222B9: 477.64 mm (H) x 269.11 mm (V) Touch active area 242B9: 528 mm (H) x 297.5 mm (V) ≥ 35 ms Touch Response time Windows 7/8/8.1/10/ *XP/*WES7 E... - Page 16 5.Technical Specifications USB3.1 x 2 including x 1 BC1.2 fast charger Input Signal Separate Sync, Sync on Green Audio In/Out PC audio-in, headphone out Convenience Built-in speaker 2 W x 2 User Convenience English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, OSD Languages Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese,...
- Page 17 5.Technical Specifications 70.65 BTU/hr 71.00 BTU/hr 71.33 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby mode) <1.71 BTU/hr <1.71 BTU/hr <1.71 BTU/hr Off mode <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr On Mode(ECO mode) 11.5 W (typ.) On mode: White, Standby/Sleep mode: White Power LED indicator (blinking) Power Supply...
- Page 18 2. *Some operating systems require driver for the touch function. The driver is avail- able in the CD disk or you can access them from the Philips website supporting pages. 3. In order to comply with international energy standards, power consumptions are under the PC/Display test mode and the monitor needs to connect with USB up- stream cable.
-
Page 19: Resolution & Preset Modes
5.Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920 x 1080 @ 60 Hz (VGA/DVI) 1920 x 1080 @ 75 Hz (HDMI/DP) Recommended Resolution 1920 x 1080 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480... -
Page 20: Power Management
6.Power Management The following setup is used to measure 6. Power Management power consumption on this monitor. • Native resolution: 1920 x 1080 If you have VESA DPM compliance display card or software installed in • Contrast: 50% your PC, the monitor can automatically • Brightness: 90% reduce its power consumption when • Color temperature: 6500k with full... -
Page 21: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 22 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 23 7.Customer care and warranty 222B9 BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 24: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 25: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the... -
Page 26: General Faqs
For further assistance, refer to the Service period may cause "burn-in", also contact information listed in Important known as "after-imaging" or "ghost information manual and contact Philips imaging", on your screen. "Burn-in", customer service representative. "after-imaging", or "ghost imaging" * Functionality different according to is a well-known phenomenon in display. - Page 27 • Shut down your computer, that the panel surface is not disconnect your old monitor and subjected to excessive shocks reconnect your Philips LCD monitor. and is protected from sharp or • Turn on your monitor and then turn blunt objects. When handling the on your PC.
- Page 28 Can I connect my LCD monitor to image” or “ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be Ans.: Yes. All Philips LCD monitors are repaired. The damage mentioned above fully compatible with standard is not covered under your warranty.
-
Page 29: Smoothtouch
Why is the touch function not available when I touch the Ans.: Important Information manual display? can be download on the Philips website support page. Ans.: Please ensure the supplied USB cable is connected between your computer and the display properly. - Page 30 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.