Table of Contents
Advertisement
4 I N S TA L L AT I O N G U I D E
The smart card golden or silver contacts must
be facing up at card insertion.
The "crossed-out wheeled bin" means separate
disposal is required for the receiver, accessories
and used batteries. They mustn't be disposed of
with your household waste. Please, inquire about the local
regulations.
For information: the Philips batteries supplied with your
receiver remote do not contain hazardous substances
such as Mercury, Cadmium, or Lead.
1
Disconnect your TV set and recorder from the mains.
2
Integrate your receiver in your existing installation as
shown on the above diagram.
3
Insert the two batteries supplied in your remote control.
4
Reconnect your TV set and recorder to the mains. Do not
connect your receiver to the mains yet!
5
Switch on your TV set and select a channel.
6
Plug the receiver's power supply cord to the mains. The
receiver front panel green LED gets on.
7
Now you should see the Welcome screen on your TV
screen. After a few seconds, the Welcome screen
disappears.
8
Then, a screen appears, that allows you to select the
language. Highlight the desired language by pressing V or
W, and then press OK.
You are prompted to confirm your choice by pressing OK
again.
Advertisement
Table of Contents
