Ir Sensor; Joysticker - Local Control (If Available) - Philips 24PFT4032 User Manual

5.  BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
 EXIT
6.
To switch back to watching TV.
 OPTIONS
7.
To open or close the Options menu.
8. OK key
To confirm a selection or setting.
9. Arrow / navigation keys
To navigate up, down, left or right.
 LIST
10.
To open or close the channel list.
Bottom
1.  Mute
To mute the sound or to restore it.
2.  Volume
To adjust the volume level.
3. Number keys
To select a TV channel directly.
4. SUBTITLE
To switch subtitles on, off or Automatic.
5.  Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page in
Text/Teletext. To start the next or previous chapter on
a disc.
6. TEXT
To open or close Text / Teletext.
3.2

IR sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
 Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
3.3
Joysticker - Local Control (if
available)
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu...
1. With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2. Press left or right to
select  Volume,  Channel or  Sources.
Press up or down to adjust the volume or tune to the
next or previous channel. Press up or down to go
6