Advertisement
Basic Reminders About Your AeroGarden
Replace Grow Bulb –
Replace
Bulb
Early Grow Bulb Replacement
If you replace Grow Bulb before "Replace Bulb" light illuminates, be sure to
restart grow bulb timer as follows:
• Press and hold "Reset" button until "Replace Bulb" light blinks – about 9
seconds.
• Release "Reset" button.
• Quickly press and release "Reset" button. "Replace Bulb" light will blink
once and grow bulb timer will be reset.
11
order bulbs at www.aerogardensupport.com
When "Replace Bulb" light on control Panel illuminates after 6 months
of use...
• Unplug AeroGarden 3 about the time your light comes on.
• Remove old Grow Bulb and carefully discard*.
IMPORTANT: To avoid burning, be sure Grow Bulb is cool before handling.
• Insert new Grow Bulb into Lamp Hood.
• Plug in AeroGarden 3 and press and hold "Reset" button until "Replace
Bulb" light blinks (3 seconds). Release "Reset" button, then press and re-
lease again. "Replace Bulb" light will go off and timer is now reset.
need AddITIonAl HelP?
For supplies and information, visit...
www.aerogardensupport.com
(continued
* Check with local recycling authorities
for light bulb recycling availability in
your area.
)
Advertisement
