Sony FDRX3000/W Manual page 29

The adhesive strength is greatest 24 hours after the item has been attached.
The flat adhesive mount and curved adhesive mount cannot be used again once they are
detached from the location surface.
When detaching, peel off slowly. If peeled off forcibly, the surface on which the mount is fixed
might be damaged.
Before attaching, check the surface of the item to be used. If it is dirty, or dust, moisture or oily
substances are attached, adhesive strength may be impaired and the item could detach with slight
impact.
Use the appropriate adhesive mount (flat or curved) for the surface where the camera will be
located. If the mount is not suitable for the surface, it may detach by slight impact.
Before use, confirm that the screw hole on the attachment buckle is not loose, and the flat or
curved adhesive mount is securely attached to the surface.
[20] Shooting Shooting movies and still images
Shooting movies (Movie mode)
Record movies.
Press the
1
Press the MENU button.
2
3
Press the UP button or DOWN button to select
mode), then press the REC/ENTER button.
* The icon of the current selected shooting mode is displayed.
Press the REC/ENTER button to start shooting.
4
To stop shooting
Press the REC/ENTER button during shooting.
Hint
While the one touch recording is set to ON, if you press the REC/ENTER button when the power is turned
off, shooting starts in the previously selected shooting mode.
(on/standby) button to turn on the power.
*
(shooting mode) - (Movie