Using The Remote Control - Philips 810H User Manual

STANDBY-ON 2
a
– Switch on the recorder or switch off to
standby mode.
b
Disc tray
OPEN CLOSE ç
c
– Opens/closes the disc tray.
d
Display panel
– Shows information about the current
status of the recorder.
e
IR
– Point the remote control towards this
sensor.
É
f
– Starts playback of the selected title/track.
/
. >
– Skips to the previous or next chapter/
track, or hold down the button to make
a reverse/forward search.
– Stops playback/recording.
g
– Starts recording the current TV channel
or the current video input source.
– Red ring lights up while recording to the
HDD or recordable DVD is in progress.
Sockets behind the fl ap
Flip down the door as indicated by the
OPEN É label at the right hand corner.
h
S-VIDEO
– S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders.
In tuner mode, press SOURCE on the
remote control repeatedly to select
'CAM2' when using this input source.
i
VIDEO
– Video input for camcorders or video
recorders.
In tuner mode, press SOURCE on the
remote control repeatedly to select
'CAM1' when using this input source.
j
L/R AUDIO
– Audio input for camcorder or the audio/
video device which is connected to the
S-VIDEO or VIDEO socket.
k
DV IN
– Input for digital camcorders or other
suitable devices using this connector.
Press DV on the remote control when
using this input source.
Main Unit
13