Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
2
Press .
3
Select [Setup]> [EasyLink].
4
Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
One Touch Play
When you play a disc on this player, the TV
automatically switches to the correct video
input source.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
Stream media from an
Android device
With Philips SimplyShare, through this player
you can stream media files from an Android
based device on your TV. For details, visit
www.philips.com/support.
3 Change settings
This section helps you change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press . To exit the
menu, press
.
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV display]: Select a picture display
•
format to fit the TV screen.
[HDMI video]: Select an HDMI video
•
resolution.
•
[HDMI Deep Color]: Display colors
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
[Picture settings]: Select a predefined
•
color setting.
[Watch 3D video]: Set to 3D or 2D
•
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
Watch 3D video
EN
17