Adjusting Volume And Taste; Adjusting Coffee And Milk Volume - Philips Saeco PICOBARISTO SM3054 User Manual

Table of Contents

Advertisement

English
12

Adjusting volume and taste

Adjusting coffee and milk volume

coffee beverage or milk froth. If the milk carafe is not installed
correctly, steam and hot milk may spray out of the milk froth
dispensing spout.
1 Place a cup under the open milk froth dispensing spout.
2 Choose your milk-based beverage.
-
Press the one-touch CAPPUCCINO, LATTE MACCHIATO or CAFÉ AU
LAIT button to brew one of these milk-based beverages right away.
-
Press the MENU/SPECIAL DRINKS button, choose DRINKS and scroll
down through the drinks to select MILK FROTH.
-
The machine reminds you that you have to install the milk carafe and
open the milk froth dispensing spout.
3 The machine first dispenses a preset volume of frothed milk into the cup
or glass and then dispenses a preset volume of coffee.
-
To stop dispensing milk or coffee, press the OK button.
4 After brewing milk-based coffee beverages, the display asks you if you
want to perform the quick clean procedure for the milk carafe. You have
10 seconds to activate the quick clean procedure. You can perform the
quick clean procedure while leaving the milk inside the milk carafe. It is
recommended to perform the quick clean procedure at least once a day.
Press the OK button to confirm that you want to perform the quick clean
procedure or press the escape button to perform the quick clean
procedure later.
You can adjust the volume of the beverage brewed according to your taste
and to the size of the cups.
Caution: Do not use cups that have a diameter of more than 8cm, to avoid
damage to the front panel.
Note: We advise you to use glass cups or cups with a ceramic-coated rim.
1 To adjust the espresso volume, press and hold the ESPRESSO button
until the display shows the MEMO icon.
-
The machine enters the programming phase and starts to brew the
selected beverage.
2 Press the OK button when the cup contains the desired amount of
espresso.
-
The tick on the display shows that the button is programmed: every
time it is pressed, the machine brews the set espresso volume.
Note: To set the volume of coffee, café au lait, cappuccino and latte
macchiato, follow the same procedure: press and hold the button of the
beverage and press the OK button when the cup contains the desired
amount. To adjust the volume of other drinks select your drink, press and
hold the OK button until the display shows the MEMO icon and then press

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saeco picobaristo sm3054/10Saeco picobaristo sm3054/00

Table of Contents