Philips sonicare HX6762/20 Manual page 14

ENGLISH
14
35_020_7376_1_DFU luxury booklet_A6_v3.indd 14
- To activate Easy-start:
Press and hold the power on/off button for 2
seconds. You hear 2 beeps to indicate that the Easy-
start feature has been activated.
Note: Using the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
Sonicare's effectiveness in removing plaque.
Smartimer
The Smartimer indicates that your brushing cycle
is complete by automatically switching off the
toothbrush at the end of the brushing cycle.
Dentists recommend brushing at leas 2 minutes
twice a day.
If you want to pause or stop brushing during your
2-minute cycle, press and hold the power on/off
button for 2 seconds. Press the power on/off button
again and the Smartimer picks up where you left off.
The Smartimer automatically resets to the beginning
of a 2-minute cycle if:
- brushing is paused for 30 seconds or longer.
- the handle is placed on the charger.
Quadpacer (specific types only)
- The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush the
4 sections of your mouth evenly and thoroughly.
- When you use the two-minute Clean or Sensitive
mode, you hear a short beep and a pause in
brushing action at 30, 60 and 90 second intervals.
08/04/14 09:13