Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An External Device - Philips BTM2185 User Manual

7 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can
select CD, USB, or FM as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for more than two seconds.
» The hour digits are displayed and begin
to blink.
2
Press / repeatedly to set hour.
3
Press SLEEP/TIMER to confirm.
» The minute digits are displayed and
begin to blink.
4
Repeat steps 2-3 to set minute, select
a source (CD, USB, or FM), and adjust
volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to activate or
deactivate the alarm.
» If timer is activated,
Tip
•
If CD/USB source is selected, but no disc is placed or
no USB connected, the system switches to the tuner
source automatically.
is displayed.

Set the sleep timer

To set the sleep timer, in turn on mode, press
SLEEP/TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated,
displayed. Otherwise,

Listen to an external device

You can listen to an external device through this
unit with an MP3 link cable.
1
Press USB/AUDIO IN repeatedly to select
AUDIO IN source.
2
Connect an MP3 link cable (not supplied)
between:
AUDIO IN jack (3.5 mm) on the unit,
•
• and the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
AUDIO IN
CD
AUDIO IN
FM
PRESET/ALBUM
REPEAT
VOL
SHUFFLE
MUTE DISPLAY PROG
TIMER
SOUND CLOCK SLEEP
is
disappears.
SOURCE
VOLUME
AUDIO IN
AUDIO IN
EN
13