Table of Contents
Advertisement
[3] PAN/TILT operation
2
4
• When
HOME button is pressed, the Camera turns to the front (and the lens moves
16
to the WIDE end) according to the factory settings. The home position can be set
freely with the preset No. "0." (Press
button.) After setting, when
position is called in. (Refer to P. 19)
• If the Camera direction is changed manually by mistake, press
Then, the Camera remembers the last PAN/TILT position in memory.
[4] Lens operation
13
• While watching the screen, press any of
direction buttons for the desired direction in
which you want to watch the image.
5
• To change the direction minutely, jog the
direction button. To change the direction
largely, hold down the direction button.
• Two operation modes are available according
to the speed: AUTO mode changing the speed
according to the zoom position, and
MANUAL mode setting the speed manually.
15
(Refer to the settings in the OSD (On-Screen
Display) Menu screen on P.27)
16
PRESET button and then press
2
0 button or
4
16
(1) Zoom operation
• The object is zoomed in (appears larger in the
screen) when
pressed, or zoomed out (appears smaller in the
screen) when
pressed.
• When
13
is held down for over one second, the zoom
speed increases.
14
- 17 -
(UP, DOWN, LEFT, RIGHT)
HOME button is pressed, the home
RESET button.
5
TELE button of ZOOM is
13
WIDE button of ZOOM is
14
TELE button or
14
15
0
4
WIDE button
Advertisement
Table of Contents
