Ip Address Setup - Oki ES7411 Network Manual

IEEE802.1X Tab
ITEM
Use
IEEE802.1X
EAP Type
EAP User
Use SSL/TLS
Certificate
Authenticate
server
Certificate
IP
ADDRESS SETUP
If you only use TCP/IP and the printer has not yet been configured, occasionally it may not
be displayed on AdminManager. You can configure the IP address of the printer by this
function.
1. Select IP Address Setup from the Setup menu.
2. Set Ethernet Address and IP Address then select OK.
The Ethernet Address (MAC address) is displayed on the configuration map, refer to
"Configuration settings" on page
COMMENTS
Enable/disable.
The following Extensible Authentication Protocols
can be configured:
EAP-TLS Selects Extensible Authentication
Protocol - TLS.
PEAP Selects Protected Extensible
Authentication Protocol.
Enter EAP User name.
Enable SSL/TLS certification.
Enable Server Authentication.
Client File: (User can specify).
certificate
Password: (User can specify).
Options to Import, Delete, View.
CA certificate File: (User can specify).
Password: (User can specify).
Options to Import, Delete, View.
7.
Network configuration > 24